Key Takeaways
- The FTC announced its fourth Made in USA enforcement action of 2026, against a safety-harness maker that assembled products in the United States using mostly imported components.
- Domestic final assembly alone does not support an unqualified Made in USA claim, particularly when imported components are essential to the product’s function or safety.
- The $4.4 million judgment, though largely suspended, signals the FTC is prepared to assert extreme monetary exposure on rule violators. The judgment is more than $1 million higher than what the FTC said in 2024 was a record Made in USA penalty — $3.175 million against a home products company.
- Companies should audit origin claims, map supply chains and keep substantiation current, as FTC warning letters have led to formal enforcement.
On Nov. 17, 2026, the FTC announced an enforcement action against an Alabama-based manufacturer of safety harnesses and other fall-protection equipment for allegedly falsely claiming that its harnesses are “Made in USA.” The FTC describes the case as its fourth Made in USA enforcement action this year. It follows the agency’s April 2026 enforcement sweep, its July 2026 warning letters and a March 2026 executive order directing the FTC to prioritize these cases.
The Settlement Terms
The FTC alleges that although the Alabama-based manufacturer’s harnesses were assembled in the United States, most of their components, including components essential to their safe operation, were imported. The proposed stipulated order provides for:
- A $4.4 million monetary judgment, largely suspended. Because of the company’s inability to pay the full amount, the judgment will be suspended after the company pays $72,527. The full $4.4 million becomes due if the company is found to have misrepresented its finances.
- Injunctive relief. The company is prohibited from misrepresenting that its products are of U.S. origin and from making misleading or unsubstantiated country-of-origin claims.
- Consumer notice. The company must notify its consumers of the settlement with the FTC.
The size of the headline judgment, even when suspended for inability to pay, signals the extreme monetary exposure the FTC is prepared to assert in these cases. In 2024 the FTC said a $3.175 million penalty against a home products company was a record Made in USA penalty.
The suspension can be lifted if the company’s financial representations prove inaccurate.
A Reminder: What the Made in USA Standard Requires
The Made in USA Labeling Rule (16 C.F.R. Part 323), finalized in 2021, makes it an unfair or deceptive act or practice to label a product “Made in the United States” unless all three of the following are true:
- The final assembly or processing of the product occurs in the United States.
- All significant processing that goes into the product occurs in the United States.
- All or virtually all ingredients or components of the product are made and sourced in the United States.
In practice, the FTC says this means a product should contain no foreign content, or only negligible foreign content. Several further points are worth noting:
- Broad definition of a Made in USA claim. The rule covers any unqualified representation, express or implied, that a product or a specified component is of U.S. origin. That includes claims that a product is “made,” “manufactured,” “built,” “produced,” “created” or “crafted” in the United States or in America.
- Labels, catalogs and online. The rule applies to product labels, including labels shown in mail-order catalogs and promotional materials, whether printed or online. Marketers face civil penalties if they put an unqualified Made in USA label on a product that does not meet the standard, including in catalogs or online. Advertising claims outside the rule’s scope remain subject to Section 5 of the FTC Act and the FTC’s Enforcement Policy Statement on U.S. Origin Claims, which apply the same “all or virtually all” standard.
- Qualified claims. Qualified claims such as “Assembled in USA using imported parts” or “Made in USA with imported materials” may be appropriate if they are accurate and substantiated.
As the November 2026 action shows, domestic final assembly alone is not enough when key components are imported.
The Administration’s Continued Priority on Made in USA Claims
The November 2026 action is part of a sustained, administration-wide focus on U.S.-origin claims:
- July 2025. FTC Chairman Andrew N. Ferguson designated July 2025 as “Made in the USA” Month. FTC staff sent warning letters to four companies and wrote to major retailers about third-party sellers that appeared to be making deceptive Made in USA claims on their marketplaces.
- March 13, 2026. President Donald Trump issued the executive order “Ensuring Truthful Advertising of Products Claiming to be Made in America.” The order directs the FTC to prioritize enforcement against unlawful Made in USA and similar American-origin claims. As noted in the April 2026 alert, the order signaled heightened enforcement but did not change the substantive legal standard.
- April 14, 2026. The FTC announced a sweep of three enforcement actions, settling with sellers of American flags and flagpole display kits, entertainment systems and footwear. It also closed two investigations based on the companies’ remedial actions. Two of the defendants received the July 2025 warning letters, which shows that FTC warnings can lead to formal enforcement.
- July 6, 2026. The FTC sent warning letters to seven companies that appeared to have misrepresented products as “Made in the USA” and to one company over a “Made in Texas” claim.
- Nov. 17, 2026. The FTC announced the safety-harness action, its fourth Made in USA enforcement action of the year.
Beyond FTC enforcement, plaintiffs’ firms continue to bring class actions over Made in USA labeling across industries. Those suits target express and implied claims, such as use of the American flag in marketing.
Next Steps for Companies
- Audit all U.S.-origin claims, including “Made in USA,” “Made in America,” “American-made,” “built in the USA,” state-of-origin claims and patriotic imagery. Cover labels, packaging, websites, social media, catalogs and third-party marketplace listings.
- Map the supply chain for each product that carries an unqualified claim. Pay particular attention to imported components that are significant to the product’s function or safety; domestic final assembly alone will not support an unqualified claim.
- Keep written substantiation and refresh it whenever sourcing changes. When the standard cannot be met, consider accurate qualified claims instead.
- Treat an FTC warning letter or inquiry as a serious matter. Recent actions show that warning letters have been followed by complaints, while prompt remediation has supported closing letters.
McGuireWoods continues to monitor Made in USA enforcement and litigation. For questions, contact the author.